---

Now support Mac OS 10.3.x or later Compatible with PowerMac G4 & G5 with PCI or PCI-X MAC DRIVERS http://www.siliconimage.com/support/supportsearchresults.aspx?pid=27&cid=3&ctid=2&osid=3&

Serial ATA II-3Gbps External 4Ports PCI-X card with eSATA External connectors to support NCQ, Raid 0+1, Raid 0 and Raid 1 !

RAID 0 (Striping), RAID 1 (Mirroring), RAID 0+1 (mirrored-stripping) and RAID 1+S (Mirrored-Sparing) improve the data performance and provide the data redundancy and rebuilding.

FEATURES:

• Four eSATA fully compliant External connectors on the card
• 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
  
  1. PCI-X
• Compliant with PCI-X Specification, revision 1.0a
• Supports 133 MHz PCI-X with 64-bit data
• All registers appear in unified memory space
• Full-chip command completion status accessible with single PCI-X burst access
• I/O port access to register space

2. High Speed Serial ATA

• Fully compliant with Serial ATA 1.0a and Serial ATA II Extensions to Serial ATA 1.0a Specifications revision 1.1
• Hot-plug capability
• Supports Serial ATA Generation 2 transfer rate of 3.0 Gbps
• Supports First-party DMA commands for Native Command Queuing
• Plesiochronous, Single PLL architecture, 1 PLL for 4 ports
• Output Swing Control
• Supports four independent Serial ATA channels
• Independent Link, Transport, data FIFO, command fetch, scatter/gather, and command execution
• 31 Commands and Scatter/Gather Tables per Port
• Four Pin header on board for Device LED connection
• Protocol Override per Command
• Staggered Spin-up Control
• Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to multiple drives
• Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives

Tech Notes:

RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring.

RAID 1+S (Mirrored-sparing) can automatically replace the failed drive and rebuild the system when booting HDD is failed.

Complete with drivers for Linux, Windows NT 4.0, 2000 ,XP and 2003 Server Please Note: Raid 5 Requires Port Multiplier Enclosure!

---

Sku:	64-101s
Vendor:	NEW STUFF
Weight:	7.00
Release Date:	03/23/07